clutch kits 3400121501 clutch plate for euro truck MB actros series
Clutch plate Description,
1. Pressure plate When the engine speed decreases, the kinetic energy of the flywheel decreases, releasing energy.
2. Flywheels can be used to reduce speed fluctuations during machine operation.
3. The flywheel serves as a clutch power transmission mechanism.
4. The kinetic energy generated by the crankshaft is transmitted to the gearbox through the clutch plate pressure plate, and then transmitted to the rear axle, so that the vehicle gets kinetic energy.
Clutch plate features,
1. The clutch pedal is completely released, and the spring presses the moving friction plate tightly against the static friction plate.
2. The friction between the two is as if the moving friction plate and the static friction plate are bonded together, and the rotation speed of the two is the same.
Specification 3400121501 clutch plate,
Item Name | Clutch Kits 3400121501 Clutch Plate For Euro Truck MB Actros Series |
Diameter(mm) | 400mm |
Number of Teeth | 18 |
Hub Profile | 45x50-18N |
3400121501 including | clutch plate 3488 017 448(3400 121 501) clutch disc 1878 004 031 |
one set box size | 42*42*38mm |
Clutch Plate Ensure the car starts smoothly,
1. This is the primary function of the clutch. Before the car starts, it is natural to start the engine.
2. When the car starts, the car gradually accelerates from a completely stationary state. If the drive train (which links the entire car) is rigidly connected to the engine, the car will suddenly move forward as soon as the transmission is in gear, but it will not start.
3. This is because when the car moves from standstill to forward, it generates a large inertial force, which causes a large resistance torque to the engine.
4. Under this moment of inertia resistance, the engine's speed drops sharply below the minimum stable speed (generally 300-500 RPM) in an instant, and the engine will stop working and the car will not start.
How to reduce clutch wear,
1. Do not step on the clutch without changing gears;
2. The time of semi-interaction should not be too long, and the gears should be changed in time according to the road conditions;
3. Don't depress the clutch pedal too early when you need to decelerate, you should wait until the speed drops to a reasonable range before stepping on the clutch pedal to reduce the clutch idling;
4. When parking, you should take off the neutral gear and release the clutch pedal, so as to avoid increasing the burden on the clutch.
5. Start with 1st gear to get the maximum torque when starting and reduce clutch overload.
Product pictures show,
Our Services & Strength,
All kinds of heavy duty clutch parts including euro truck and japanese and chinese.